Bonjour à tous
je viens de monter un graveur DVD LG GSA H58N sur mon PC que j'ai acheté à Cdiscount
J'arrive à lire les CD et DVD mais je n'arrive pas à graver quoi que ce soit je suis toujours en echec de gravure
comme logiciel j'ai Nero8, Neroexpress
j'ai le rapport suivant qui me sort à chaque fois, si quelque sait ce que cela veut dire ses suggestions seront les bienvenues
Merci
Voici le rapport en question:
FJC
1K22-0867-0795-66M4-5033-7366-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=220160 bytes, created 10/09/2004 18:34:26
NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4
Recorder: <HL-DT-ST DVD-RAM GSA-H58N>Version: 1.00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <PIONEER DVD-ROM DVD-115 >Version: 1.12 - HA 1 TA 1 - 8.1.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H58N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-115 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H58N D: CdRom0
PIONEER DVD-ROM DVD-115 E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523340kB)
Free physical memory: 218MB (223236kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.7.2008
Image CD
23:03:24 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
23:03:25 #2 Text 0 File Burncd.cpp, Line 3212
HL-DT-ST DVD-RAM GSA-H58N
Protection contre les ruptures activés
23:03:25 #3 Text 0 File Burncd.cpp, Line 3530
Turn on Track-At-Once, using CD-R/RW media
23:03:36 #4 Text 0 File ThreadedTransferInterface.cpp, Line 1057
Removed 2 run-out blocks from end of track 1. Length: 346212 -> 346210.
23:03:36 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1057
Removed 2 run-out blocks from end of track 1. Length: 346212 -> 346210.
23:03:36 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 346211 ( 76:58.11)
23:03:36 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
23:03:36 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD-RAM GSA-H58N;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)
23:03:36 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:03:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - Mode CD-ROM 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 346212 (346212) = #346212/76:56.12
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 346210 blocks [D: HL-DT-ST DVD-RAM GSA-H58N]
--------------------------------------------------------------
23:03:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: HL-DT-ST DVD-RAM GSA-H58N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 709349376, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 346212 | 346212 | 0x00
346212 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
23:03:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1057
Removed 2 run-out blocks from end of track 1. Length: 346212 -> 346210.
23:03:36 #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
23:03:36 #14 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
23:03:36 #15 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
23:03:36 #16 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
23:03:36 #17 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
23:03:36 #18 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 16x (2 400 Ko/s)
23:03:36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:03:36 #20 Text 0 File MMC.cpp, Line 22430
Set BUFE: Buffer underrun protection -> ON
23:03:36 #21 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 74390400
23:03:44 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 08 03
Buffer x05db0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
23:03:44 #23 CDR -1502 File Writer.cpp, Line 306
DMA-driver error, CRC error
D: HL-DT-ST DVD-RAM GSA-H58N
23:03:48 #24 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
D: HL-DT-ST DVD-RAM GSA-H58N
23:03:48 #25 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack
23:03:48 #26 Text 0 File MMC.cpp, Line 17189
<HL-DT-STDVD-RAM GSA-H58N> start Close Track #2
23:04:06 #27 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 16x (2 400 Ko/s)
23:04:06 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
23:04:13 #29 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed
23:04:13 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)